Kwame Nkrumah University Of Science And Technology Landmarks Made In Asante Casting
DOI:
https://doi.org/10.18533/journal.v9i7.1784Keywords:
Asante casting, Landmarks, Souvenir item, KNUST, Three dimensionAbstract
Landmarks are essential geographical features that give easy identification to a specific location. Although landmarks serve very important purpose, most of these landmarks could only been seen at the site they are found. These landmarks can be made handy as souvenir items which will intend advertise and showcase the beauty of these landmarks. The Kwame Nkrumah University of Science and Technology has a wide array of souvenirs already available for purchase and distribution. However most of them lack originality and a deeper sense of connection to the prestigious university. These souvenir items can be produced using the Asante casting technique depicting the various landmarks in KNUST. This research is qualitative and employs studio base research design for the execution of the project. It was found that during periods of increase in rainfall, P.O.P. moulds serve as the best investment material because it dries and hardens quickly. Also, the addition of sand to the mould material (P.O.P.) cost efficient and durable. It is recommended that, technology such drones can be used to capture bird’s view of very large landmarks to improve designs and also to come up with detailed designs within a short period of time, three dimensional computer aided software can be used.
References
Agyen-Gyasi, K., 2011, The Ghana Collection at the Kwame Nkrumah University of Science and Technology Library. Information Development, 27(1), pp.66-73.
Booker, D., 2018, Looking for Landmarks: Working at the Same Time, The Rosen Publishing Group, Inc, New York.
Cave, J. and Jolliffe, L. eds., 2013. Tourism and souvenirs: Glocal perspectives from the margins (Vol. 33). Channel View Publications.
Corrigan, P., 1997, The Sociology of Consumption: An Introduction, SAGE Publications, California.
Ellis, W.O., 2011. State of the University Address to Convocation.
Goldstein, B., B., 2012, The Importance of Landmarks, viewed 1 August 2019 from http://ezinearticles.com/?The-¬Importance-¬of-¬Landmarks&id=7281257.
Golledge, G., R., 2002, The Nature of Geographic Knowledge, Annals of the Association of American Geographers. 92. 1 - 14.
Hume, D., 2013, Tourism Art and Souvenirs: The Material Culture of Tourism an introduction, Routledge, London.
Kissi, S.B., 2011. Evaluation of bees wax and core materials for traditional lost wax casting (Doctoral dissertation).
Kissi, S.B., Fening, P.A. and Adom, D., 2016. Beeswax in Asante Castings: The Then, Now and the Way Forward. Journal of Arts and Humanities, 5(10), pp.07-22.
Lasusa, M., D., 2007, ‘Eiffel Tower key chains and other pieces of reality: The philosophy of souvenirs’, The Philosophical Forum. 38. 271 - 287.
Mensah, E.E. & Oppong-Adjei, K., 2017, ‘Selected landmarks of KNUST in three dimensional souvenirs’, Undergraduate thesis, Dept. of Industrial Art, Kwame Nkrumah University of Science and Technology.
Morgan, N. & Pritchard, A., 2005, ‘On souvenirs and metonymy: Narratives of memory, metaphor and materiality’, Tourist Studies, 5(1), pp. 29–53.
Paraskevaidis, P. & Andriotis, K., 2015, Values of souvenirs as commodities. Tourism Management, International Journal of Tourism Management. 48. 1-10.
Ramana Rao, T., V., 2007, Metal Casting: Principles And Practice, New Age International (P) Limited, Publishers, New Delhi.
Ramsay, N., 2009, ‘Taking-place: Refracted Enchantment and the Habitual Spaces of the Tourist Souvenir’, Social & Cultural Geography - SOC CULT GEOGR. 10. 197-217.
Smith-Asante, E. (2016) ‘Biography of Ghana’s first President, Dr. Kwame Nkrumah’, Graphic Online, 08 March. Available at: https://www.graphic.com.gh/news/general-news/biography-of-ghana-s-first-president-dr-kwame-nkrumah.html (Accessed: 02 August 2019).
Swanson, K., 2014, Souvenirs, Tourists, and Tourism, in Lew, A., A., Hall, C., M., & Williams, A., M., The Wiley Blackwell Companion to Tourism, pp.179-188, Wiley Blackwell Publishers, New Jersey.
Swanson, K., K. & Timothy, D., J., 2012, 'Souvenirs: Icons of meaning, commercialization and commoditization' Tourism Management, vol. 33, no. 3, pp. 489-499.
Thompson, F., Hannam, K., Petrie, K., 2012, ‘Producing ceramic art works through tourism research’, Annals of Tourism Research, vol. 39, no. 1, pp. 336-360.
Tsuji, B., Lindgaard, G. & Parush, A., 2005, Landmarks for navigators who are visually impaired.
Wilkins, H., 2011, ‘Souvenirs: What and Why We Buy’, Journal of Travel Research, 50(3), pp. 239–247.
ZSM (2008), Peace Pole, Kumasi, Ghana, Wikimedia Commons, viewed 2nd August 2019, https://commons.wikimedia.org/wiki/File:Peace_Pole,_Kumasi,_Ghana.jpg.
ZSM (2011), KNUST main entrance with Kwame Nkrumah Memorial Park, Wikimedia Commons, viewed 2nd August 2019, https://commons.wikimedia.org/wiki/File:KNUST_main_entrance_with_Kwame_Nkrumah_Memorial_Park.jpg.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).